View T-51639D084JU-FW-A-AB_5797539.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 1/36 lcd module technical specification T-51639D084JU-FW-A-AB no. item page -- contents 1 1 application 2 2 overview 3 3 absolute maximum ratings 4 4 electrical characteristics 4 5 interface pin connection 7 6 interface timing 9 7 block diagram 14 8 mechanical specification 15 9 optical characteristics 17 10 reliability test condition 19 11 inspection standards 20 12 handling precautions for tft-lcd module 21 -- packaging specification 24 -- products number labeling forms 28 -- lamp unit for 8.4? xga 30 type no. jan 17, 2005 first edition final revision ****** checked b y ( aci en g ineerin g division ) approved b y ( qualit y assurance division ) prepared by (aci engineering div ision)
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 2/36 1. application this specification applies to co lor tft-lcd module, t-51693d084ju-fw-a-ab. these specification papers are the proprietary pr oduct of optrex and include materials protected under copyright of optrex. no part of this docu ment may be reproduced in any form or by any means without the express written permission of optrex. optrex does not assume any liability for infringeme nt of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. no license, express, implied or other wise, is granted under any patents, copyrights or other intellectual property rights of optrex or of others. optrex classifies the usage of the tft-lcd modu le as follows. please confirm the usage before using the product. (1) standard usage computers, office equipment, factory auto mation equipment, test and measurement equipment, communications, transportation eq uipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by tft-lcd directly. (2) special usage medical equipment, safety equipment, transp ortation equipment, provided, however, that tft-lcd is necessary to its operation. (3) specific usage cockpit equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other eq uipment. optrex should make a contract that stipulate apportionment of responsi bilities between optrex and our customer. the product specified in this document is designed for ?standard usage? unless otherwise specified in this document. if customers intend to use the prod uct for applications other than those specified for ?standard usage?, they should contact o ptrex sales representative in advance. optrex has been making continuous effort to improve the reliability of its products. customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. optrex assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. please contact and consult a optrex sales represen tative for any questions regarding this product.
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 3/36 2. overview T-51639D084JU-FW-A-AB is 8.4? color tft-lcd (thin film transistor liquid crystal display) module composed of lcd panel, driver ics, control circuit, and backlight unit. by applying 6 bit or 8 bit digital data, 1024 768, 260k-color or 16.7m-color images are displayed on the 8.4? diagonal screen. input power voltage is 3.3 v for lcd driving. the type of data and control signals are digital and transmitted via lvds interface per typ. 65 mhz clock cycle. inverter for backlight is not included in this mo dule. general specifications are summarized in the following table: item specification display area (mm) 171.264(h) 128.448 (v) (8.4-inch diagonal) number of dots 1024 3 (h) 768 (v) pixel pitch (mm) 0.16725 (h) 0.16725 (v) color pixel arrangement rgb vertical stripe display mode normally white tn number of color 260k(6 bi t/color)16.7m(8 bit/color) brightness (cd/m 2 ) 300 wide viewing angle technology optical compensation film viewing angle (cr 10) -65~65 (h) -50~60 (v) surface treatment anti-glare and hard-coating 3h electrical interface lvds(6 bit/8 bit) optimum viewing angle (contrast ratio) 12 o?clock module size (mm) 205.0 (w) 152.4 (h) 11.3 (d) module mass (g) 380 backlight unit ccfl, 2-tubes, edge-light, replaceable characteristic value without any note is typical value.
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 4/36 3. absolute maximum ratings item symbol min. max. unit power supply voltage for lcd vcc 0 4.0 v logic input voltage vi ? 0.3 vcc+0.3 v lamp voltage vl 0 2,000 vrms lamp current il 0 15 marms lamp frequency fl 30 60 khz operation temperature (panel) note 1,2) t op(panel) ? 20 70 c operation temperature (ambient) note 2) t op(ambient) ? 20 70 c storage temperature note 2) t stg ? 20 80 c [note] 1) measured at the center of active area and at the center of panel back surface 2) top,tstg 40 c : 90%rh max. without condensation top,tstg > 40 c : absolute humidity shall be less than the value of 90%rh at 40 c without condensation. 4. electrical characteristics (1) tft- lcd ambient temperature: ta = 25c item symbol min. typ. max. unit remarks power supply voltage for lcd vcc 3.0 3.3 3.6 v *1) power supply current for lcd icc -- 370 550 ma *2) permissive input ripple voltage vrp -- -- 100 mvp-p vcc = +3.3v *1) power and signals sequence: t1 10ms 200ms t5 0 < t2 50ms 200ms t6 0 < t3 50ms 0 t7 t4 10ms t1 t2 t3 data 0.9vcc 0.9vcc 0.1vcc vcc t4 t5 t6 t7 vl data: rgb data, dclk, hd, vd, dena, sc 0.1vcc 0.1vcc lcd power supply lo g ic si g nal backlight power supply
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 5/36 vcc-dip conditions: 1) when 2.6 v vcc < 3.0 v, td 10 ms 2) when vcc < 2.6 v vcc-dip conditions shall also follow the power and signals sequence. td 2.6 v 3.0 v vcc *2) current condition: 64-gray-bar-pattern(6 bit) 256-gray-bar-pattern(8 bit) 768 line mode vcc = +3.3 v, f h = 48.4 khz, f v = 60 hz, f clk = 65 mhz (2) backlight ta = 25c item symbol min. typ. max. unit remarks lamp voltage vl -- 450 -- vrms il = 6.0 marms lamp current il 3.0 6.0 6.5 marms *1), *5) lamp frequency fl 30 -- 60 khz *2) 750 -- -- vrms ta = 25c 1125 -- -- vrms ta = 0c starting lamp voltage vs 1440 -- -- vrms ta = ? 20c lamp life time lt 50,000 -- -- h *3), *4), il = 6.0 marms continuous operation *1) lamp current measurement method (the curre nt meter is inserted in low voltage line.) ctl cth ctl cth lcd module a *owfsufs power supply a *2) lamp frequency of inverter may produce interf erence with horizontal synchronous frequency, and this may cause horizontal beat on the display. th erefore, please adjust lamp frequency, and keep inverter as far from module as possible or use el ectronic shielding between inverter and module to avoid the interference. *3) lamp life time is defined as the time either wh en the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. *4) the life time of the backlight depends on the ambient temperature. the life time will decrease under low/high temperature.
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 6/36 *5) please use the inverter which has sy mmetrical current wave form as follows, the degree of unbalance: less than 10% the ratio of wave height: less than 2 10% i ph i pl i ph : high side peak i pl : low side peak the degree of unbalance = |i ph - i pl | / irms 100(%) the ratio of wave height = i ph (or i pl ) / irms current wave form
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 7/36 5. interface pin connection (1) cn 1(interface signal) used connector: fi-seb20p-hfe(jae) corresponding connector: fi-s20s[for discrete wire], fi-se20m[for smt] function (isp 6 bit compatibility mode) pin no. symbol 6 bit input 8 bit input function (isp 8 bit compatibility mode) 1 vcc +3.3 v power supply 2 vcc +3.3 v power supply 3gnd gnd 4gnd gnd 5 link 0- r0, r1, r2, r3, r4, r5, g0 r2, r3, r4, r5, r6, r7, g2 r0, r1, r2, r3, r4, r5, g0 6 link 0+ r0, r1, r2, r3, r4, r5, g0 r2, r3, r4, r5, r6, r7, g2 r0, r1, r2, r3, r4, r5, g0 7gnd gnd 8 link 1- g1, g2, g3, g4, g5, b0, b1 g3, g4, g5, g6, g7, b2, b3 g1, g2, g3, g4, g5, b0, b1 9 link 1+ g1, g2, g3, g4, g5, b0, b1 g3, g4, g5, g6, g7, b2, b3 g1, g2, g3, g4, g5, b0, b1 10 gnd gnd 11 link 2- b2, b3, b4, b5, hd, vd, dena b4, b5, b6, b7, hd, vd, dena b2, b3, b4, b5, hd, vd, dena 12 link 2+ b2, b3, b4, b5, hd, vd, dena b4, b5, b6, b7, hd, vd, dena b2, b3, b4, b5, hd, vd, dena 13 gnd gnd 14 clkin- clock ? 15 clkin+ clock + 16 gnd gnd 17 link3- see: *2) r0, r1, g0, g1, b0, b1 r6, r7, g6, g7, b6, b7 18 link3+ see: *2) r0, r1, g0, g1, b0, b1 r6, r7, g6, g7, b6, b7 19 mode low=isp 6 bit compatibility mode high=isp 8 bit compatibility mode 20 sc scan direction control. low = normal, high = reverse *1) the shielding case is connected with gnd *2) recommended wiring of pin 17,18 (6 bit input) low data lv d s transmitter 6 8 0
6 2 0
ps pin 17 pin 18 pin 17 pin 18 vcc (2) cn 2,3 (backlight) used connector: bhr-02(8.0)vs-1n(jst) corresponding connector: sm02(8.0)b-bhs(jst) pin no. symbol function 1cth vblh high voltage 2ctl vbll low voltage yyyyy [note] vblh-vbll = vl
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 8/36 (3) isp data mapping a. isp 6 bit compatibility mode(6 bit input) clkin+/- link0+/- 1clk link1+/- link2+/- r1 g0 r5 r4 r3 r2 r0 g2 b1 b0 g5 g4 g3 g1 b3 dena vd hd b5 b4 b2 clkin+/- link0+/- 1clk link1+/- link2+/- link3+/- r3 g2 r7 r6 r5 r4 r2 g4 b3 b2 g7 g6 g5 g3 b5 dena vd hd b7 b6 b4 r1 b1 b0 g1 g0 r0 b. isp 6 bit compatibility mode(8 bit input) clkin+/- link0+/- 1clk link1+/- link2+/- link3+/- r1 g0 r5 r4 r3 r2 r0 g2 b1 b0 g5 g4 g3 g1 b3 dena vd hd b5 b4 b2 r7 b7 b6 g7 g6 r6 c. isp 8 bit compatibility mode
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 9/36 6. interface timing lvds transmitter input signal (1)timing specifications item symbol min. typ. max. unit frequency f clk 43.6 65 80 mhz dclk period t clk 12.5 15.4 22.9 ns horizontal active time t ha 1024 1024 1024 t clk horizontal front porch t hfp 024--t clk horizontal back porch t hbp 4 296 -- t clk vertical active time t va 768 768 768 t h dena vertical front porch t vfp 23--t h vertical back porch t vbp 135-- t h frequency f h 42.4 48.4 60 khz period t h 16.6 20.7 23.6 s hd low width t whl 1 136 -- t clk frequency f v 55 60 75 hz period t v 13.3 16.7 18.2 ms vd low width t wvl 16--t h [note] 1) polarities of hd and vd are negative in this specification. 2) dena (data enable) shall always be positive polarity as shown in the timing specification. 3) dclk shall appear during all invalid period, and hd shall appear during invalid period of frame cycle. 4) lvds timing follows the timing specificatio ns of lvds receiver ic: thc63lvdf84b(thine). 5) 20 t hfp + t hbp < 512
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 10/36 (2) timing chart a. horizontal timing chart dclk data (r,g,b) 12 1023 1024 3 invalid data invalid data t ha t hfp t hbp t whl t h =1/f h first data last data dena hd 12 767768 3 invalid data invalid data t wvl t vfp t vbp t v =1/f v line data v d dena hd t va b. vertical timing chart
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 11/36 (3) color data assignment a. 6 bit input input data r data g data b data r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 color msblsbmsblsbmsblsb black 000000000000000000 red(63) 111111000000000000 green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue(63) 000000000000111111 cyan 000000111111111111 magenta111111000000111111 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 basic color white 111111111111111111 red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red(62) 111110000000000000 red red(63) 111111000000000000 green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 green green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue(1) 000000000000000001 blue(2) 000000000000000010 blue(62) 000000000000111110 blue blue(63) 000000000000111111 [note] 1) definition of gray scale color (n) --- n indicates gray scale level. higher n means brighter level. 2) data 1:high, 0: low
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 12/36 b. 8 bit input input data r data g data b data r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 color msb lsb msb lsb msb lsb black 0 000000 0 0 00 0000 0 0 00 0000 0 red(255) 1 111111 1 0 00 0000 0 0 00 0000 0 green(255) 0 000000 0 1 11 1111 1 0 00 0000 0 blue(255) 0 000000 0 0 00 0000 0 1 11 1111 1 cyan 0 000000 0 1 11 1111 1 1 11 1111 1 magenta 1 111111 1 0 00 0000 0 1 11 1111 1 yellow 1 111111 1 1 11 1111 1 0 00 0000 0 basic color white 1 111111 1 1 11 1111 1 1 11 1111 1 red(1) 0 000000 1 0 00 0000 0 0 00 0000 0 red(2) 0 000001 0 0 00 0000 0 0 00 0000 0 red red(255) 1 111111 1 0 00 0000 0 0 00 0000 0 green(1) 0 000000 0 0 00 0000 1 0 00 0000 0 green(2) 0 000000 0 0 00 0001 0 0 00 0000 0 green green(255) 0 000000 0 1 11 1111 1 0 00 0000 0 blue(1) 0 000000 0 0 00 0000 0 0 00 0000 1 blue(2) 0 000000 0 0 00 0000 0 0 00 0001 0 blue blue(255) 0 000000 0 0 00 0000 0 1 11 1111 1 [note] 1) definition of gray scale color (n) --- n indicates gray scale level. higher n means brighter level. 2) data 1:high, 0: low
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 13/36 (4) display position and scan direction d(x,y) shows the data number of input signal for lcd panel signal processing pcb. sc: low yyyyyyyyy y yyy sc: high d(1,1) d(1024,1) d(1,768) d(1024,768) cn3 d(1024,768) d(1,768) d(1024,1) d(1,1) cn3 cn2 cn2
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 14/36 7. block diagram s3072 s3071 i/f connector cn1 timing converter drivers(source) tft-lcd drivers(gate) power supply circuit backlight ccfl 1 2 cn2,3 g1 g2 g768 timing signal display data s1 s2 power
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 15/36 8. mechanical specifications (1) front side unit:mm
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 16/36 (2) rear side unit:mm [note] we recommend you referring to the detailed drawing for your design. please contact our company sales representa tive when you need the detailed drawing.
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 17/36 9. optical characteristics ta = 25c, vcc = 3.3 v, input signals: typ. values shown in section 6 item symbol condition min. typ. max. unit remarks contrast ratio cr = = 0 300 400 -- -- *1)*2)*6) luminance lw = = 0 250 300 -- cd/m 2 *1)*3)*6) luminance uniformity ? lw = = 0 -- -- 30 % *1)*4)*6) tr = = 0 -- 6 -- ms *1)*5)*6) response time tf = = 0 -- 19 -- ms *1)*5)*6) horizontal -55 55 -65 65 -- *1)*6) vertical cr 10 -40 50 -50 60 -- *1)*6) horizontal -70 70 -80 80 -- *1)*6) viewing angle vertical cr 5 -60 70 -70 80 -- *1)*6) image sticking tis 2 h -- -- 2 s *7) red rx 0.539 0.569 0.599 ry 0.297 0.327 0.357 green gx 0.287 0.317 0.347 gy 0.490 0.520 0.550 blue bx 0.125 0.155 0.185 by 0.118 0.148 0.178 white wx 0.283 0.313 0.343 color coordinates wy = = 0 0.299 0.329 0.359 -- *1)*6) [note] these items are measured using cs1000(minolta) fo r color coordinates, ezcontrast(eldim) for viewing angle, and cs1000 or bm-5a(topcon) for othe rs under the dark room condition (no ambient light) after more than 30 minutes from turning on the lamp unless noted. condition: il = 6.0 marms, fl = 55 khz *1) measurement point contrast ratio, luminance, response time, viewing angle, color coordinates: display center luminance uniformity: point 1 5 shown in a figure below (1,1) 256 512 768 192 384 576 (1024,768) 2 4 5 3 1 *2) definition of contrast ratio cr=on (white) luminance / off(black) luminance *3) definition of luminance lw= on (white) luminance
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 18/36 *4) definition of luminance uniformity ? lw=[lw(max)/lw(min)-1] 100 *5) definition of response time white 90% 90% 10% 10% black tf tr luminance *6) definition of viewing angle( , ) *7) image sticking continuously display the test pattern shown in the figure below for two-hours. then display a completely white screen. the previous image sh all not persist more than two seconds at 25c. black lines white area cols 510-514 rows 382-386 test pattern for image sticking test
T-51639D084JU-FW-A-AB (ab) no. 2005-0004 optrex corporation page 19/36 10. reliability test condition (1) temperature and humidity test item conditions high temperature high humidity operation 40c, 90% rh, 240 h (no condensation) high temperature storage 80c, 240 h low temperature storage ? 20c, 240 h thermal shock (non- operation) between ? 20c (1h) and 80c(1h), 100 cycles (2) shock & vibration item conditions shock (non-operation) shock level: 980 m/s 2 (100 g) waveform: half sinusoidal wave, 2 ms number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs vibration (non-operation) vibration level: 9.8 m/s 2 (1.0 g) waveform: sinusoidal frequency range: 5 to 500hz frequency sweep rate: 0.5 octave /min duration: one sweep from 5 to 500 hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) judgment standard the judgment of the above tests should be made as follow: pass: normal display image, no damage of the display function. (ex. no line defect) partial transformation of the mo dule parts should be ignored. fail: no display image, damage of th e display function. (ex. line defect)

▲Up To Search▲

Price & Availability of T-51639D084JU-FW-A-AB

	To Download T-51639D084JU-FW-A-AB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .